HOLLINGSWORTH Standard Wires for 40" Cards
Latest designs are shown in green.

Cylinder Wire
Part
Number
for
Ordering

JDH Number Descriptive
Code		 Base
Width
(mm)		 Front
Angle		 Height
Code
(Height)		 Points/Inch² Version
Code
072456338 040_40D_948H 0.40 40° D(2.0 mm) 948 H(MASTERSTEEL)
072456103 050_30D_876H 0.50 30° D(2.0 mm) 876 H(MASTERSTEEL)
072456120 060_20E_633H 0.60 20° E(2.5 mm) 633 H(MASTERSTEEL)

Doffer Wire
Part
Number
for
Ordering

JDH Number Descriptive
Code		 Base
Width
(mm)		 Front
Angle		 Height
Code
(Height)		 Points/Inch² Version
Code
072404198 090_30H_332D 0.90 30° H(4.0 mm) 332 D(ENHANCED POINT)
072404417 090_30H_376D 0.90 30° H(4.0 mm) 376 D(ENHANCED POINT)
072455615 090_30J_338X 0.90 30° J(5.0 mm) 338 X(Serrations)
072403879 100_25H_348X 1.00 25° H(4.0 mm) 348 X(Serrations)
072403841 100_30H_300X 1.00 30° H(4.0 mm) 300 X(Serrations)
072404269 100_30H_300XD 1.00 30° H(4.0 mm) 300 X(Serrations)
D(ENHANCED POINT)

Lickerin Wire

Lickerin Wire (Surface)
Part
Number
for
Ordering

JDH Number Descriptive
Code		 Base
Width
(mm)		 Front
Angle		 Height
Code
(Height)		 Points/Inch² Version
Code
072404081 320_10J__40H 3.20 10° J(5.0 mm) 40 H(MASTERSTEEL)

Lickerin Wire (Camlock)
Part
Number
for
Ordering
JDH Number Descriptive
Code		 C=Camlock Threads
Per Inch		 Front
Angle		 Height
Code
(Height)		 Points/Inch²
072402620 C20_10J_212 C(Camlock) 20 10° J(5.0 mm) 212
072402915 C12_15J__79 C(Camlock) 12 15° J(5.0 mm) 79

Lickerin Wire (Groove)
Part
Number
for
Ordering
JDH Number Base
Width
(mm)		 Front
Angle		 Height
Code
(Height)		 Points/Inch²
SF10 Varies with Groove Size 5° Varies with Roll
Diameter		 Varies with Thread
Requirements
HC41 Varies with Groove Size 10° Varies with Roll
Diameter		 Varies with Thread
Requirements
HR482 Varies with Groove Size 20° Varies with Roll
Diameter		 Varies with Thread
Requirements

Take-Off Wire
Part
Number
for
Ordering
JDH Number Descriptive
Code		 Base
Width
(mm)		 N=Negative
Front
Angle		 Front
Angle		 Height
Code
(Height)		 Points/Inch²
072400533 107N15G_210 1.07 N(Negative) 15° G(3.5 mm) 210
072403694 180N30I__93 1.80 N(Negative) 30° I(4.5 mm) 93

FLATMASTER® Flat-Top Wire
Part
Number
for
Ordering

JDH Number Descriptive
Code		 Base
Width
(mm)		 Front
Angle		 Height
Code
(Height)		 Points/Inch² Version Code
072403429 094_25J_541M 94 25° J(5.0 mm) 541 M(FLATMASTER®)
072403391 094_10J_378M 94 10° J(5.0 mm) 378 M(FLATMASTER®)
072403439 094_10J_541M 94 10° J(5.0 mm) 541 M(FLATMASTER®)

Revolving Flat Top Wire - Conventional
Type PPSI Height Wire No. Pattern(Standard)
H27 F 270 8.0 mm 22/34
H37 F 370 8.0 mm 26/34

Type PPSI Height Wire No. Pattern(Standard)
H35 350 8.0 mm 28/32
H42 420 8.0 mm 28/32
H430 LS 430 7.5 mm 27/31
H50 500 8.0 mm 28/32
HD42/28 420 8.0 mm 28/32
HD51/28 510 8.0 mm 28/32

Type PPSI Height Wire No. Pattern(Dual Density)
HD38K/27LS 440/290 7.5 mm 27/31
HD44K/27LS 520/350 8.0 mm 27/31


PO Box 516, Greenville, SC 29602-0516 USA
Phone 864.297.1000
Fax 864.297.2637
E-mail sales@jdhow.com

This page and all subsequent pages are proprietary and are the exclusive property of John D. Hollingsworth on Wheels, Inc. They are not to be copied or reproduced without our written permission.
©2000 John D. Hollingsworth on Wheels, Inc.